Troubleshooting - PLEASE READ IT FIRST IF YOU HAVE ANY PROBLEM!

FAQ - Frequently asked questions

If you will experience any problems please contact support@gloriavictisgame.com

Join our official TeamSpeak 3 server addres using gloriavictisgame.com as IP address!


Troubleshooting - "Server Under Maintenance" error solution!


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Performance tips
20-01-2018, 00:41, (This post was last modified: 20-01-2018, 13:37 by bartold.)
#1
Performance tips
This is a short guideline to help you increase your performance in Gloria Victis. There are few steps which you can do:

Integrated video card

One of the most frequent reasons of performance issues is running the game using integrated video card. It happens automatically on specific configurations, like notebooks with switchable graphics processors. If it happens, you will be informed about it by a message displayed in the main menu: [Image: gv_integrated_card.jpg]

Preferred graphics processor

First, set gv.exe to run automatically with your dedicated video card. If you are using Nvidia card, click RMB on your desktop and click “NVIDIA control panel”.

Go to “Program Settings” tab in the “Manage 3D settings” section and select gv.exe from the programs list [1]. If gv.exe is not visible in this list, click “Add” icon [2] to the right and find gv.exe in the installation folder. Now click “Select the preferred graphics processor for this program” [3] and select “High-performance NVIDIA processor” [4]. Now apply the changes.
[Image: nvidia_program_settings.jpg]

You can also select the high-performance video card by clicking RMB on the gv.exe file. Next hover your cursor over “Run with graphics processor” line and select your dedicated video card, i.e.
[Image: graphics_processor_rmb.jpg]

Image settings

Go to “Adjust image settings in preview” in the “3D settings” tab in NVIDIA control panel. Select “Use my preference emphasizing:” option and set it to performance.
[Image: nvidia_image_settings.jpg]

Power management

Go to “Global Settings” tab in the “Manage 3D settings” in NVIDIA control panel. Select the “Power management mode” and set it to “Prefer maximum performance”.
[Image: nvidia_power_management.jpg]

Now go to Settings ––> System. Click Power & Sleep [1] and select “Advanced power settings” [2].

[Image: power_settings.jpg]

Now select the “High performance” power plan [3]. Next click “Check plan settings” [4] to open the Power Options and make sure that the Maximum Processor State is set to 100%.

[Image: power_settings_advanced.jpg]
[Image: power_options.jpg]

Following these tips should help you increase your performance in Gloria Victis.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)


Enhanced By CloudFlare.